If you own a home in Western New York, sooner or later someone will ask whether you’ve tested for radon. Maybe it came up during a home inspection, maybe a neighbor mentioned it, or maybe you’re finally finishing the basement and want to know what’s down there. Radon testing in Buffalo, NY is inexpensive, simple, and one of the most worthwhile things you can do for a home you plan to live in for years.
Quick answer: Radon is a naturally occurring radioactive gas that can seep into homes from the soil, and the EPA recommends testing every home. In Buffalo and Western New York you can test with a short-term DIY kit (typically a few days) or hire a professional for a continuous monitor, which is common during home sales. If results come back at or above the EPA action level of 4 pCi/L, a radon mitigation system installed by a qualified pro can reduce levels. Check current EPA and NYS Department of Health guidance for specifics.
Need a hand with testing or a follow-up fix? You can request radon testing help from a vetted local pro using the form on this page.
What radon is and why it matters
Radon is a colorless, odorless gas produced when uranium in soil and rock breaks down. It rises through the ground and can enter a house through cracks in the foundation, floor drains, sump pits, gaps around pipes, and other openings. Because you can’t see or smell it, the only way to know whether it’s in your home is to test.
The EPA identifies radon as a leading cause of lung cancer in the United States, second only to smoking, and the risk generally depends on how high the levels are and how long you’re exposed. That’s why public health agencies, including the NYS Department of Health, encourage homeowners to test and fix elevated levels rather than guess.
Why Western New York basements get tested
Radon varies house by house, even on the same street, so you can’t predict your level from a neighbor’s result. New York State health officials have long noted that radon can turn up in homes in many parts of the state, and Erie and Niagara counties are no exception. The only reliable answer for your address is a test.
A few things about local housing make testing especially sensible:
- Older foundations. Many Buffalo-area homes, from Parkside and North Buffalo to South Buffalo and the West Side, sit on older stone or block foundations with plenty of seams, sump pits and utility penetrations.
- Closed-up winters. When the lake-effect snow is flying and windows stay shut for months, indoor air gets exchanged less, and the heating season can pull soil gas into the house.
- Basements people actually use. Finished rec rooms, home offices, laundry areas and kids’ play spaces mean more hours spent at the lowest level of the house.
Homes in the suburbs, from Amherst, Tonawanda and Kenmore to West Seneca, Hamburg and Orchard Park, are all worth testing too. Slab-on-grade houses and homes with crawl spaces can have radon just like basement homes.
Radon levels differ from house to house, so your neighbor’s result tells you nothing about yours.
DIY radon test kit vs professional test
You have two solid options. Neither is wrong; the right choice depends on your situation.
| Factor | DIY test kit | Professional test |
|---|---|---|
| Typical cost | Generally low (often tens of dollars; check current prices) | Higher, usually a flat fee for the visit and report |
| How it works | You place a charcoal canister or similar device for a set period, then mail it to a lab | A tester sets up a continuous radon monitor and provides a detailed report |
| Best for | Routine screening in a home you already own | Real estate transactions, documentation, and retesting after mitigation |
| Turnaround | Test period plus lab time | Often results at the end of the test period |
| Watch out for | Placement or timing mistakes | Make sure the tester is properly certified |
For most homeowners, a short-term DIY kit is a perfectly reasonable first step. If you’re buying or selling, a professional test is common because it comes with documentation and a monitor that tracks readings over the test period. New York State maintains guidance on choosing certified testers and labs, so check the NYS Department of Health site for current requirements before you hire or buy.
How to do a short-term test correctly
Results are only as good as the setup. Follow the instructions in your kit, and keep these general EPA-style practices in mind:
- Test the lowest lived-in level. That’s usually the basement, even if you don’t spend much time there yet.
- Use closed-house conditions. Keep windows and exterior doors closed (except for normal entering and leaving) for at least 12 hours before and throughout a short-term test.
- Pick the right spot. Place the device at breathing height, away from drafts, high humidity, exterior walls, sump pits, and the laundry area.
- Leave it undisturbed. Don’t move the device during the test period.
- Seal and mail promptly. Follow the kit’s directions for sending it to the lab, then wait for your report.
Local tip: Radon readings tend to run higher when the house is closed up, so late fall through winter is a popular time to test in Buffalo. Avoid testing during a major storm with high winds, or when you’re running a fan or opening windows for a project, since that can skew results.
Understanding your radon test results
Radon is measured in picocuries per liter of air, written pCi/L. The EPA’s action level is 4 pCi/L, meaning it recommends fixing the home if a properly done test comes back at or above that number. The EPA also notes that there is no known safe level of radon, and suggests considering action for results between 2 and 4 pCi/L.
- Below 2 pCi/L: Generally considered low. Plan to retest periodically, especially after renovations or foundation changes.
- 2 to 4 pCi/L: Worth discussing options with a qualified professional. Many homeowners choose to reduce levels in this range.
- 4 pCi/L or higher: Follow up right away. The EPA recommends mitigation, often after confirming with a second test.
Because radon levels fluctuate with weather, season and house conditions, a high short-term result is often followed by a second short-term test or a long-term test (90 days or more) to confirm the average. Your test kit instructions and the EPA’s consumer guide explain the recommended next steps.
A single high reading is a signal to retest and act, not a reason to panic.
What to do if radon levels are high
The good news is that radon is fixable. Homes with elevated levels are typically treated with a radon mitigation system, and a qualified contractor can install one, often in a day or so, depending on the house.
The most common approach is called sub-slab depressurization. A pipe is run through the slab (or a membrane in a crawl space) into the soil below, and a fan draws the gas from under the house and vents it safely outside above the roofline. The idea is to intercept radon before it enters your living space.
What to expect from mitigation
- An assessment first. A mitigator will look at your foundation type, sump pit, drainage and layout to design a system.
- Visible components. You’ll usually see a vent pipe and a fan, plus a small gauge showing the system is running. Many people place them in a basement corner, garage or exterior wall.
- Ongoing operation. The fan runs continuously. Expect a modest effect on electricity use and plan to check the gauge from time to time.
- A retest. After installation, test again to confirm levels have dropped, and plan to retest every couple of years or after major changes to the house.
Costs vary with the home and the contractor, so get written estimates from more than one qualified pro and ask what’s included. Check the NYS Department of Health for current guidance on choosing certified radon professionals.
Radon, wet basements and other basement projects
Radon testing fits naturally into the rest of basement upkeep. If you’re dealing with seepage, a wet basement or a sump pit that’s constantly active, sort out the moisture and radon together, since both involve how your foundation meets the soil. Our guide to basement waterproofing in Buffalo covers the moisture side of the picture, and cracks sealed during waterproofing can also be part of a radon plan.
Planning to turn the lower level into living space? Test first. Our piece on finishing a basement in Buffalo walks through moisture, egress and what to fix before the drywall goes up, and radon belongs on that list. It’s far easier to run a mitigation pipe before walls are closed in. If you also spot musty smells or damp walls, read up on mold in the basement too.
A tighter house can hold more radon, so if you’re sealing drafts, take a look at air sealing and weatherstripping for Buffalo winters and retest after major air sealing or insulation work. Sealing is still worthwhile; just verify the results rather than assuming.
Radon when buying or selling a Buffalo home
Radon testing is a common part of a home inspection in this area, and it’s usually an optional add-on you can request. If you’re shopping in the Buffalo housing market, ask your inspector about it early, since a test needs a set number of hours and closed-house conditions. Results can feed into negotiations, and a mitigation system installed by a seller is often a selling point.
Buyers of vintage homes should also work through a broader checklist. Our upcoming guide to buying an older home in Buffalo and our overview of old house problems in Buffalo will help you line up radon alongside wiring, foundations, roofs and heating systems.
Local tip: If you’re a buyer, ask whether the home has ever been tested or mitigated and request any paperwork. If a system is already installed, check that the fan is running and the gauge reads normally before closing.
If you’d rather have an expert handle the test or a possible fix, request radon testing from a vetted local pro using the form on this page.
Radon testing FAQ
How often should I test my Buffalo home for radon?
Test once if you’ve never tested, then retest after major renovations, foundation work, or air sealing, and periodically thereafter. Many guidelines suggest retesting every couple of years, and always after installing or modifying a mitigation system.
Does a new house need radon testing?
Yes. Radon can be present in homes of any age, including new construction, so the EPA recommends testing regardless of how old the house is.
Can I test for radon myself, or do I need a certified professional?
You can use a DIY kit for routine screening. For real estate transactions or when you want documented results, hiring a certified tester is common. Check the NYS Department of Health for current guidance on certified professionals and labs.
Will a radon mitigation system be noisy or hurt my home’s value?
Modern systems are typically fairly quiet, and the fan and pipe are usually placed in a basement, garage or exterior location. A properly installed system is generally seen as a positive, since it shows the issue has been addressed.
Is radon only a problem in basements?
No. Basements are common entry points, but radon can also enter through slabs and crawl spaces, and it can move upward through the house. Test the lowest lived-in level of your home.
Get radon testing help from Buffalo pros
A vetted local pro will reach out with a free, no-obligation quote.
